Catalogue

ADKTECH Circuit Tester can check signal for cable assembly from 0-36V, with accuracy 0.1V. It can check continuity of cable assembly. Display the ON and OFF figure. LED is ON when the cable is continuous; LED is OFF when discontinuous.
• Check signal for cable assembly from 0-36V, with accuracy 0.1V.
• Display " >>" when voltage exceed 36V.
• Display value and waveform at the same time when the voltage is over 0.1V. When the voltage is over 0.5V, the blue LED light on at the same time.
• Auto waveform freezing.
• Check continuity of cable assembly. Display the ON and OFF figure. LED is ON when the cable is continuous; LED is OFF when discontinuous.
Need a CR2032 button battery. It can work for over one year.
• OFF: turn off the power
• VOLT: view voltage and its waveform
• CIRC: check circuit continuity
Please switch it off if don't use it.

Specifications

• voltage: 0-36V
• waveform: 0-5V, 2s
• cable length: 2.7m
• battery:3V CR2032
• digital voltage display accuracy: 5%
• continuity test: available
• LED indicator: green and blue
• low consumption design: CR2032 button battery, which can work for over one year
• Auto turn off
• Auto freeze of waveform
• Over voltage protection
• With clamp and probe, special designed for auto diagnosis and service

Packaging

• Package Size: 257mm*148mm*17mm
• Weight : 110g
• Cable Length: 2000mm
• Box: 528mm × 477mm × 320mm
• Quantity: 100pcs/ Box
• Weight of one packaging for delivery:12kg